| Maintain confined space standards before starting the activities |
| No access provided for entry to confined space. |
| identification label / tag missing |
| confined space identification tag not visible |
| Handbags and lunch boxes found hanged on power cable |
| Welding mc found slightly outside of shed for which rain water falling on it. |
| Electrical equipment in rainy areea |
| Rain protection canopy are not provided for portable power distribution board |
| observed poor power cable rotation at site |
| electrical equipment wet condition |
| Non Substandard earthing was used for welding Activity |
| Electrical cable laying in ground floor |
| Low illumination as electric bulb bulb is not glowing near lift, pathway. |
| electrical top cover found damaged condition. |
| Electric cable was lying in the water. This can lead into serious electric hazard. |
Found ELectrical Cable Laying On Ground Without any Protection and seen Forklift Mounted On It.
|
| Observed That WIthout Insulated and Plug Top Electricl Cable Being Used At Store(Fabrication Yard) |
| Power cable near plugtop not insulated properly |
| lighting Jb in open condition |
| Double earthing not provided |
| Electrical cable laying with sheeting sharp edge and hanging in hook without insulation. |
| Electrical cable laying on material for grinding machine connection. |
| Electrical plug & top broken and double insulation was remove near the plug. |
| Light directly tie-up with structure without insulation. (stand required). |
| Open cable connection, light placed in wet surface.(Stand required). |
| bare welding cable at furnance floor |
| Barrication was not provided during grinding activity to restrict unauthorized entry in line of fire. |
| Welders helper was not wearing the black goggles action taken: immediately changed and counseling done |
| Work was being carried out in poor illumination. |
| Oxygen hose pipe near the NRV crack found while checking before start of the job. |
| tools and nuts and bolt spread on floor. |
| storage of cylinders improperly |
| Cylinder storage shed not proper and sufficient. No clear distinction between empty and filled cylinder. |
| Improper stacking of gas cylinders. |
| Oxygen cylinder transportation on a carrying in horizontal position. |
| Without taking off the reflective jacket,the workman doing hot work. At the same time another workman doing gas cutting job very close to the first one without information. |
| no barricade in hot work,so stopped barricade and started |
| not using cylinders properly |
| Welder without necessary PPE at furnance floor. |
| Welding cable damaged near welding holder. |
| barication missing from gas cutting spark falling area. |
| oxygen cylinder lay on ground |
| Space constraint, unconditionally doing weding work. |
| Fire extinguisher was not kept in welding activitie area |
| Welder Helper Not wearing the Face shield |
| without face shield gascutter doing unsafe activity |
| Welding work started on wet structure. |
| sharp edge protection for power cable not provide |
| Waste bin not maintain. |
| material stored in front of stair case. |
| Hydra reversing without reverse horn. |
| Swing area of operating crane not barricaded and manpower movement observed. |
| Damaged web sling found at workplace. |
| No safe access for material loading and shifting work at ground floor. |
| Lifting tools and tackles not inspected in the store. No segregation of inspected and non inspected tools and tackles. |
| Crane operator found using mobile phone with work in progress. |
| poor house keeping |
| Structural material shifting throughout the narrow access. |
| lifting happened without guiderope |
| A chain found without inspection and identification |
| siling without colour coding. |
| Damaged belt sling was used for work |
| hydra ATB not working. correction done at site. |
| team was lifting the plate by using crane without any guird rope controller |
| Hammer found in damaged condition at stacker yard. |
| Edge protection missing. |
Comments
Post a Comment